REMARK: Do not use for construction. Refer to factory certified dimensions & weights. This page includes data current at time of publication, which should be reconfirmed at the time of purchase. In the interest of product improvement, specifications, weights and dimensions are subject to change without notice.

General notes

1. Standard refrigerant connection sizes are ND 100 BSP MPT inlet and outlet (for models VXC 14 through 28 refrigerant connection sizes are ND 80 BSP MPT), consult your local BAC representative for size and location. Other connection sizes are available on special order. Refrigerant connections are standard bevelled for welding.
2. Make up, overflow, suction, drain connection and access door can be provided on side opposite to that shown; consult your BAC Balticare representative.
3. Unit height is indicative, for precise value refer to certified print.
4. Shipping/operating weights indicated are for units without accessories such as sound attenuators, discharge hoods, etc. Consult factory certified prints to obtain weight additions and the heaviest section to be lifted.
5. The drawing units with only one spray pump show the standard right hand arrangement has the air inlet side on the right when facing the connection end . Left hand can be furnished by special order.
6. Coil, overflow, make-up and spray water connections are always located on the same nd of the unit. For double pump units an additional overflow connection will be installed on the other end of the unit.
7. On model VXC 14 through VXC 135 access doors are located at the opposite of the air inlet side, ensure sufficient space for entry when positionning these units.
8. For indoor applications of evaporative condensers, the room may be used as a plenum with ductwork attached to the discharge only. If inlet ductwork is required, an enclosed fan section must be specified; consult your BAC representative for details.
9. Fan kW is at 0 Pa ESP. To operate against external static pressure up to 125 Pa, increase each fan motor one size.
10. Refrigerant charge listed is R717 operating change. To determine operating charge of R 22 refrigerant, multiply by: 1,93. For R134A, multiply by : 1.98.
11. For dry operation, standard motors must be increased one size to avoid motor overloading. Extended surface coils are available to vastly increase dry capacity without motor size increase. Consult your Bac Balticare Representative for selection and pricing.
12. Models VXC 357-454, VXC 562-380, VXC 495-516 and VXC 725-804 have only 1 coil casing section and one or two fan motors. Fan cycling results in only on-off operation. On these units all fans need to operate simultaneously.
13. Models VXC 714-907, VXC 1124-1360, VXC 990-1032 and VXC 1430-1608 have 2 coils casing sections and one or two fan motors per coil casing section. Fan cycling results in only-off operation. On these units all fans need to operate simultaneously per coil casing section.

Last update: 27/06/2019

Sound attenuation XB

VXC_sound_attenuation_XB

1. Access door; L = Unit Length; W = Unit Width; H = Unit Height (see Engineering Data).

Model Unit + Atten # pieces shipped # Access Doors Dimensions (mm) Weights (kg)
Discharge Intake W2 H1 W1 L1 L2 Intake Solid Bottom Discharge Total
14-28 41 1 2 2352 1090 1030 890 902 130 30 150 310
36-65 41 1 2 2352 1090 1030 1800 1816 220 50 220 490
72-97 4 1 2 2352 1090 1030 2710 2731 300 70 350 720
110-135 4 1 2 2352 1090 1030 3635 3645 370 100 420 890
150-205 4 1 2 2583 1600 1420 3635 3645 480 120 520 1120
221-265 4 1 2 3542 2070 1955 3525 3645 630 190 650 1220
S288-S350 4 1 2 3542 2070 2365 3550 3645 630 190 800 1620
S403-S504 4 2 2 3542 2070 2365 5385 5480 860 300 1090 2250
S576-S700 7 2 2 3542 2070 2365 7200 7322 1260 380 1600 3240
S806-S1010 7 4 2 3542 2070 2365 10885 10998 1720 600 2180 4500
357-454 4 1 2 4145 2560 2965 3525 3645 710 230 880 1820
562-680 4 2 2 4145 2560 2965 5365 5480 980 350 1210 2540
714-908 7 2 2 4145 2560 2965 7050 7322 1420 460 1760 3640
1124-1360 7 4 2 4145 2560 2965 10730 10994 1960 700 2420 5080
495-516 4 1 2 2752 2650 3575 3525 3645 710 280 1030 2020
715-804 4 2 2 4752 2560 3575 5365 5480 980 420 1410 2810
990-1032 7 2 2 4752 2560 3575 7050 7322 1420 560 2060 4040
1430-1608 7 4 2 4752 2560 3575 10730 10994 1960 840 2820 5620